Specially formulated for lubricating Automatic Taping and Finishing Tools. Avoid the damage to gaskets wipers and O-rings caused by the use of solvent based lubricants such as WD-40.
DIRECTIONS:
Automatic Taper - Spray lubricant to creaser wheel, cutter chain wheels, drive sprockets and main chain, gooser assembly, all head liners and shafts, disengaging rod, control arm and guide, and any other moving parts. Spray taper head and tape guide to prevent compound from sticking to it. Do not spray the exterior of the tool, such as the tape spool, main tube or control tube and any other areas marked to remain lubricant free.
Extension Handle - Spray a small film of lubricant on the main profile to reduce friction when extending the handle. Do not lubricate the head or the internal brake mechanism.
All Other Tools - Spray on rubber gaskets, wipers, O-rings and any other moving parts.
CONTAINS: Paraffin Oils (CAS #64742-71-8), Hydrotreated Heavy Paraffinic Distillate (CAS #64742-54-7), Hydrotreated Light Petroleum Naphtha (CAS #64742-49-0), N-Butane (CAS #106-97-8), N-Hexane (CAS #110-54-3), Isobutane (CAS #75-28-5), Propane (CAS #74-98-6), and Cyclohexane (CAS #110-82-7).
