New Flex 18v cordless drywall sander which comes with the cut out sanding head, 2 battiers, charger & Carry Case.
- Electronics: Speed preselection with adjustment wheel, overload protection, restart lock and temperature monitoring
- Easy guiding: by optimal balance between motor and sanding head
- Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.
- Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.
- Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
- Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tube
- Electronic management system (EMS) protects the machine, extends the service life, and increases efficiency
- Dust-proof on/off switch
- LED battery capacity display
- FLEX battery system: suitable for all FLEX 18,0 V battery packs.
Battery voltage |
18.0 V |
Battery capacity |
2.5 / 5.0 Ah |
Backing pad diameter |
225 mm |
No-load speed |
1150 - 1800 rpm |
Orbit rate, no load MH-T |
3950-6200 opm |
Orbit rate, no load MH-X |
3200-5000 opm |
Head angle of inclination |
100 ° |
Tool holder, wall and ceiling sander |
hook and loop |
Length |
1440 mm |