Flex VCE33 M Class Vacuum 110 v
Flex VCE33 M Class Vacuum 110 v
VCE33 M AC
£699.00 ( Incl VAT VAT £838.80)

Safety vacuum cleaner with automatic filter cleaning system, 30 l, class M

  • The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
  • With permanent socket and electronic automatic on/off switch
  • Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s
  • The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
  • Continuous automatic flat filter cleaning ensures no loss of suction
  • The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
  • Suction diameter selector switch for adjusting the optimum flow rate
  • Suitable for wet vacuuming: with electronic liquid level control
  • Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose
  • Dust-protected antistatic finish prevents electric charging of the suction hose
  • Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory)
  • Simple filter change without removing the suction head
  • Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)

Technical attributes

Power input P. max. 1400 watt
Max. volume flow 4500 l/min
Max. vacuum 25000 Pa
Filter surface 5000 cm²
Container volume 30 l
Liquid capacity 17 l
Power take off 100-2400 watt
Size ( W x L x H) 565 x 385 x
565 mm
Cable length 7,5 m
Weight 15,2 kg

 

Safety vacuum cleaner with automatic filter cleaning system, 30 l, class M

  • The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
  • With permanent socket and electronic automatic on/off switch
  • Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s
  • The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
  • Continuous automatic flat filter cleaning ensures no loss of suction
  • The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
  • Suction diameter selector switch for adjusting the optimum flow rate
  • Suitable for wet vacuuming: with electronic liquid level control
  • Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose
  • Dust-protected antistatic finish prevents electric charging of the suction hose
  • Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory)
  • Simple filter change without removing the suction head
  • Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)

Technical attributes

Power input P. max. 1400 watt
Max. volume flow 4500 l/min
Max. vacuum 25000 Pa
Filter surface 5000 cm²
Container volume 30 l
Liquid capacity 17 l
Power take off 100-2400 watt
Size ( W x L x H) 565 x 385 x
565 mm
Cable length 7,5 m
Weight 15,2 kg

 
Products In This Category
404675 GE5 Housing
404675 GE5 Housing
£15.36
(Inc £18.43)
View Options
Flex 18v Drill Set
Flex 18v Drill Set
£230.00
(Inc £276)
View Options
Flex GE 5 Sander 110 volt
New Flex Lightweight Sander only.
£608.00
(Inc £729.6)
View Options
GE 7
Flex Ge7 M Class Sanding Set
£1449.00
(Inc £1738.8)
View Options
Customer Reviews (0)